THE FINDER

To better use The Finder, please make sure your IOS device is updated to the latest version. *The Finder can only be used on iOS 14.5 or later version on iPhone and iPad devices. 

Pull the plastic tab to enable battery contact, it should beep [once] indicating power on.

1) Located “Find My” on your device and open the app so it’s ready to go. Make sure Bluetooth on your device is switched on. 

2) Press The Finder function button [once] to hear a beeping sound. This will indicate that the device is in paring mode. The duration of pairing mode is one minute. Press the function button again to re-enter pairing mode. 

3) Select the “items” tab then tap “Add Item”. 

4) Select “Other supporting Items”5) Make sure The Finder is close to your pairing device. A notification labelled “F2” will appear shortly after connection, select ‘Connect’. 

5) Make sure The Finder is close to your pairing device. A notification labelled 'F2' will appear shortly after connection, select 'Connect'.

6) Rename The Finder. Select ‘Continue’.

7) Connect The Finder to Apple ID. Select “Continue’. 

8) Select ‘Finish’. The Finder will make a beeping sound twice to signal that it is finished setting up. 

1) Enable The Finder “Lost Mode’ feature in the ‘Find My’ App.

2) Enter a phone number or email address. You may entered a message that will be shared to the person that finds your item. Select ‘Activate’ to enable ‘Lost Mode’.

3) Please Note: When ‘Lost Mode’ is enabled, ‘Notification When Found’ is automatically enabled. 

4) Please Note: When ‘Lost Mode’ is enabled, The Finder will be locked and cannot be paired to a new device. 

To replace the battery, carefully open The Finder case from its side. Replace The Finder battery with compatible CR2032 batter [positive pole placed upward]. 

If there is an unknown device mixed in your belongings, you will be notified via Apple products, you will be notified on these Apple devices, and such features supports iOS or iPadOS 14.5 and later versions only.

If you are with a friend who is carrying a device, or you’re in an overcrowded environment, as long as the device is close to its owner, a notification will not be triggered.

Enable ‘Lost Mode’ is disabled. Select ‘Remove Item’ labelled in red. Select again ‘Remove’ to confirm.

After successfully removing The Finder from device, press The Finder function button four times rapidly. Each press will sound a beep.

Hold on the fifth press until a sound chime occurs. The Finder will reset and is ready to pair to a new device.

The picture on the package is for reference only. Please refer to the actual product. This product contains a built-in battery.

Safety Warning: Disassembly, impact or extrusion or put into fire is prohibited. Do not put in high temperature environments. Battery in water is prohibited to use.

Use of the works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacture to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this Smart Finder device, use of this product or its compliance with safety and regulatory standards. Apple, Apple Find My, Apple Watch, Find My, iPhone, iPad, iPadOS, Mac, macOS and watchOS are trademarks of Apple Inc. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

While The Finder is designed to assist in tracking and locating personal items, we cannot guarantee the recovery of lost or missing luggage.

The device is intended to provide general location information and should not be relied upon as the sole method for securing or retrieving valuables. Our company assumes no responsibility or liability for any loss, damage, or delay related to the use of the The Finder in connection with luggage or other items. For issues with lost luggage, please contact the relevant authorities or service providers for assistance.

© 2025 Who Gives A Flying. All rights reserved. Patent pending. Designed in Australia.